CELayout Editor - Getting Started / Building

From CEGUI Wiki - Crazy Eddie's GUI System (Open Source)
Revision as of 22:20, 28 April 2007 by Tgraupmann (Talk | contribs)

Jump to: navigation, search

Abstract

This page tries to get you up and running with the layout editor. It will explain both the use of a distribution, and downloading from SVN. If you have problems, don't hesitate to visit the forums. And besides, you may alter this page with any information you think will be helpful to future readers of this page. Some parts might be a little too verbose, but better safe then sorry ;-) If you're done reading, don't forget to read the manual.

Using a distribution

This is the recommended way. The distributions are stable and compatible with official CEGUI library releases. For example the 0.4.1 editor will work fine ("proven") with the 0.4.1 CEGUI release. Visit the download page for Windows installer(s) and Linux source distribution(s). Before installing a new version, it is recommeded that you uninstall a previous version first, because files might get removed in newer versions and such. On windows you can stop reading now. Linux and/or SVN users must read on for a bit more.

Compiling yourself

If you are a non-windows user, or prefer SVN access over distributions, you must follow the steps mentioned in this topic.

Setup CEGUI

Please see the CEGUI download info for downloading and compiling the cegui library.

Setup wxWidgets

This topic explains how to get and setup this cross-platform application framework.

Download

Distributions for many platforms can be found here.

Compile

Compile WxWidgets

WxWidgets (2.8.3)

  • Download wxAll.
  • Edit wxWidgets-2.8.3\include\wx\msw\setup0.h and wxWidgets-2.8.3\include\wx\univ\setup.h to change from #define wxUSE_GLCANVAS 0 to #define wxUSE_GLCANVAS 1.
  • Build wxWidgets-2.8.3\build\msw\wx.dsw
  • More unknown changes???

WxWidgets (2.6.4)

  • Download wxAll.
  • Edit wxWidgets-2.6.4\include\wx\msw\setup.h and wxWidgets-2.6.4\include\wx\univ\setup.h to change from #define wxUSE_GLCANVAS 0 to #define wxUSE_GLCANVAS 1.
  • Build wxWidgets-2.6.4\build\msw\wx.dsw


WxWidgets (less than 2.6.4)

Because of issues I had compiling wxWidgets properly, I'm going to go into more depth for using Visual Studio 7.1 or 8.0 to do so. (Jouninkomiko 05-20-2006)

  • Because the editor uses the wxGLCanvas, open include/msvc/wx/setup.h, and change the define for wxUSE_GLCANVAS from 0 to 1.
    • Within the src/wxWindows.dsw solution you'll find this setting inside the wxWindows project, under Headers/Setup/setup.h

On Windows:

  • Open src/wxWindows.dsw and batch build all the Debug and Release configurations (but not the unicode or the dll ones)
    • This is according to wxWidget's wiki, but ScriptKid got it to work without this step, so you might not need to do it
  • Open build/msw/wx.dsw, and batch build all the Debug and Release configurations (but not the unicode or the dll ones)
  • If it hasn't been done so already, add include/msvc and include to the include build paths and lib/vc_lib to the library paths in Visual Studio.

On Linux:

  • Enter ./configure --with-opengl --enable-unicode
  • Enter make
  • Enter make install

Setup the editor

This topic explains how to get and setup the editor from sources.

Checkout

If you use a non-command line utility such as TortoiseSVN, you can choose one of these URLs to respectively checkout the HEAD or one of the stable branches. 

https://svn.sourceforge.net/svnroot/crayzedsgui/CELayoutEditor/trunk
https://svn.sourceforge.net/svnroot/crayzedsgui/CELayoutEditor/branches/v-0-4-1
https://svn.sourceforge.net/svnroot/crayzedsgui/CELayoutEditor/branches/before_wxwidgets

Or, from the command line (same order): 

svn co https://svn.sourceforge.net/svnroot/crayzedsgui/CELayoutEditor/trunk MyEditorFolder
svn co https://svn.sourceforge.net/svnroot/crayzedsgui/CELayoutEditor/branches/v-0-4-1 MyEditorFolder
svn co https://svn.sourceforge.net/svnroot/crayzedsgui/CELayoutEditor/branches/before_wxwidgets MyEditorFolder

Retreiving is always "anonymous", so it should work immediately.

Compile

On windows:

  • Open vc++6/CELayoutEditor.dsw (VS6) or vc++6/CELayoutEditor.sln (VS7.1). Conversions should happen automatically when opening on newer versions. Make sure that you add the directories 'wxWidgets-x.x.x\include' and 'wxWidgets-x.x.x\include\msvc' to your Include Directories, and 'wxWidgets-x.x.x\lib\vc_lib' to your Library Directories.
  • Also add CEGUI-0.5.0 to the project include folders.
  • Also add CEGUI-0.5.0\include to the project include folders.
  • Build either Debug or Release.

On Linux:

  • Enter ./bootstrap
  • Enter ./configure
  • Enter make
  • Enter make install
  • Optionally set the CELAYOUTEDITOR_DATAPATH environment variable to point the editor to the correct 'datafiles' directory. If you do not set this variable, the editor will default to the location where it thinks the datafiles were installed (this will be typically be something like /usr/local/share/CELayoutEditor/datafiles). See the configuration file for additional details.

Hopefully, we will have a mac-compatible project or makefile in the future as well, so watch this space! :-)

Retrieved from "http://cegui.org.uk/wiki/index.php?title=CELayout_Editor_-_Getting_Started_/_Building&oldid=2589"